Showguard and D3O® Important Information and Care Instructions

DISCLAIMER

Horse riding, show jumping and related activities are inherently dangerous and involve the risk of serious injury. Our Products are designed to offer comfort, high performance and/or protection. However, no safety Product(s) sold by us or on our Platform can offer complete protection from injury or death to riders in case of fall, collision, impact, loss of control or otherwise. We disclaim any responsibility for injuries or death incurred while wearing or using any Product(s) offered for sale. We make no representations, express or implied, regarding the fitness of the Products for any particular purpose nor the extent to which the Products protect riders from injury or death. 

CAUTION

  • Vests, body protectors and other protective Products must fit well and all retention straps, zippers or laces must be securely fastened.
  • The protective qualities of a safety Product (including the Showguard Product), may be compromised by prior impact, age, use and many common substances. You must always follow our recommendations before applying cleaning agents, paints or adhesives.
  • Any reference to CE and EN1621 standards and/or certification is for informational purposes only. Please note that the CE and EN1621 certifications apply to motorcycle clothing and/or gear, and there are no equivalent safety standards for show jumping.
  • The Showguard BPR L2 Back Protector has been certified to meet CE Level 2 standards, and the Showguard BPR L1 Back Protector has been certified to meet CE Level 1 standards. However, the CE certification applies only to motorcycle clothing and/or gear, and its effectiveness in show jumping is not guaranteed.
  • The Showguard BP4 L2 Back Protector has been certified to meet EN1621 Level 2 standards, and the Showguard BP4 L1 Back Protector has been certified to meet EN1621 Level 1 standards. However, the EN1621 certification applies only to motorcycle clothing and/or gear, and its effectiveness in show jumping is not guaranteed.
  • The CE and EN1621 certifications apply solely to the back protectors themselves and do not extend to the use of these protectors in combination with other equipment, such as vests or harnesses.
  • By purchasing any of the Products offered for sale the purchaser AGREES FREELY AND VOLUNTARILY TO ASSUME ALL RISKS, including the risk of personal injury damage death or property damage.

SHOWGUARD CONSUMER CARE INSTRUCTIONS

  • Fabric Composition: 81% Nylon, 19% Spandex
  • Designed in Australia
  • Made in China

 To keep your Showguard in top condition, follow these care guidelines:

 WASHING INSTRUCTIONS

  • Remove the Showguard Vest from the Showguard before washing
  • Remove the D3O® back protector before machine washing
  • Ensure all velcro is fastened together before washing, and if possible, place the vest in a washing bag to prevent snagging on other garments
  • Machine wash separately in cold water on a gentle cycle
  • Use mild detergent
  • Do not bleach
  • Do not iron
  • Tumble dry low or air dry for best results

GENERAL CARE TIPS

  • Avoid pulling or overstretching fabric to maintain durability
  • Store in a dry place when not in use 
  • Hang if possible

D3O® BACK PROTECTOR CONSUMER CARE INSTRUCTIONS 

STORAGE 

D3O® products should be stored at room temperature, in a ventilated dry place, out of direct sunlight. Do not store under heavy objects. Do not store in extreme temperatures. If wet after use, ensure your D3O® product is dry before storing. Never fold your D3O® product. 

WASHING / DRYING

If applicable, D3O® protectors should be removed carefully from the garment before washing. D3O® protectors are wipe-clean only, using a damp cloth. NEVER use cleaners or detergents on or launder your D3O® product. This may result in irreparable damage and will severely reduce the effectiveness of your D3O® product. After washing, allow to dry in a ventilated space at room temperature; do not use hair dryers or other heaters to dry your D3O® product. 

MAINTENANCE

Never modify any part of your D3O® product. Protectors should be inspected before use for signs of wear and/or damage and replaced if necessary. If your D3O® protector has sustained a significant blunt impact, it should be discarded and replaced. Please note: No personal protection equipment can offer complete protection against all injuries. The user hereby agrees to absolve the manufacturer of all liability in respect of any personal injury. D3O® component shape must be maintained at all times.